An all-in-one inkjet printer with scanning and copying capabilities is the Canon Pixma MG2522. Both Windows and macOS support it. When a single colour runs out, you may switch to the multi-color ink cartridge. There is no display screen on the Canon MG2522 printer. Only a straight USB connection is available; networking is not an option. The Canon Pixma Mg2522 Setup requires a space that is 9.3 inches high by 16.7 inches wide by 22.6 inches deep when it is set up for operation.

You may connect your Canon Pixma MG2522 printer to wifi by following the instructions below. There are several different connection directions, including wifi, USB cable, and Wi-Fi. 

Here is Your Guide to Setup Canon Pixma MG2522 Printer

It is also really simple to set up. But to make things easier, we've provided Canon Pixma Mg2522 Wireless Setup instructions on both Windows and Mac computers. Therefore, it is advised that all users follow the below setup instructions to set up the printer without difficulty.

  • You must first unpack your Canon Pixma MG2522 printer before you can set up the printer's options and install the cartridges.
  • Before unpacking the printer, be sure that it is well sealed.
  • The next step is to unpack it and move it closer to the wall socket.
  • Connect the printer with the power cord and turn it on by pushing the power button to configure it.
  • Set your settings for the language, nation, display date and time, and then click "Save" to confirm.
  • Wait for the slot to slide a bit to either side when you open the cartridge access door, then remove the fresh cartridge from its packaging and place it in the slot.
  • After completing the aforementioned steps, try testing the printer by printing.

Here is Your Guide to Connect Canon Pixma MG2522 Printer to LAN Network

It is important to attach the printer to the same Wi-Fi network as the computer, tablet, or other device in order to connect it wirelessly. It is advised that all users follow the instructions below to connect your printer to WiFi: -

  • Utilizing the power button, turn on your Canon MG2522.
  • Touch the wireless connection option and select the LAN settings on the printer.
  • When the device, smartphone, or other device's settings are complete, tap yes and choose the wireless LAN setup. OK? The choice shows up on your screen.
  • Select the device you wish to link it to, then in the following step click Start Setup.
  • Choose the connection method based on your preferences.
  • Enter the login information for the router you want to use to connect the printer.
  • A printout can be used to examine the setup of the Canon Pixma MG2522 Printer after a short period of time.

References: Canon Printer Mg2522 Wireless Setup